|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-03-2022, 10:06 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 40
|
2007 ezgo rearend problem
Looked at a 2007 ezgo for a guy tonight. It has the stock motor and clutch’s. Has bigger tires(12” probably). His girlfriend drove it to work today and when she stopped the rearend made a clunk. The secondary clutch and shaft that goes into the rearend spins freely now. I am not familiar with these rearends. Is there gears that mesh to make it drive, is there a key way that may have let go, etc…. I’ve done a little research for a schematic on this rearend which is a me29. If someone has a schematic would you share it please. And any other information from past experiences. We plan to tear it out and see what broke. Thanks
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-04-2022, 12:36 AM | #2 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: 2007 ezgo rearend problem
Dont tear it out just yet.
Get someone to sit on it and try to drive it while you watch the hub nuts in the rear wheels. If one spins, it is most likely to be a stripped brake drum and will need replacing. If so come back here and someone will give you the correct procedure to tighten the hub nut correctly. Its a common issue on these. |
08-04-2022, 01:44 AM | #3 |
Gone Wild
Join Date: Mar 2022
Location: Ohio
Posts: 456
|
Re: 2007 ezgo rearend problem
Go in a star pattern like for a cylinder head
|
08-04-2022, 01:49 AM | #4 |
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,461
|
Re: 2007 ezgo rearend problem
Leon, we are talking about hub nuts, not wheel lug nuts!!!!!!!!!!!!!!!!!!!
|
08-04-2022, 03:37 PM | #5 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 773
|
Re: 2007 ezgo rearend problem
Make sure the neutral lock out switch on the shifter isn't engaged. If it wasn't turned all the way, possible that it snapped into the locked position.
Several photos in this thread link below of the internals of the transaxle. The thread is of high speed gear install, but you can see what is in there. Several items could have broken, but I doubt it. https://www.buggiesgonewild.com/showthread.php?t=168666 |
08-04-2022, 04:32 PM | #6 |
Gone Wild
Join Date: Mar 2022
Location: Ohio
Posts: 456
|
Re: 2007 ezgo rearend problem
Oh sorry
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2007 EZGO TXT Charging problem | Electric EZGO | |||
2007 EZGO PDS problem | Electric EZGO | |||
2007 Ezgo Starting Problem (Gas) | Gas EZGO | |||
2007 EZGO charing problem | Electric EZGO | |||
2007 gas Ez go problem | Gas EZGO |