Toe/camber issues and uneven tire wear

[sem1845]

How do I adjust the toe/ camber to fix extreme uneven tire wear. Is there even enough adjustment I can do to fix the toe and camber?

Thanks!

[SV1]

Check U tube. There are a number of good videos. Very helpful to actually see it being done. Your situation looks extreme, if something didn’t get bent or broken give it a try, it only costs time

[Volt_Ampere]

Get a straight on picture but that thing looks way the hell off! Of course you can adjust the toe. Some carts don't have camber adjust but they all have toe adjust. My specs for my Yamaha are 1/8 inch of toe in. You adjust the tie rods to adjust the toe. Do it with the weight of a driver in the seat for best results.

[meimk]

Looks like your lift kit does have at least some camber adjustment available by way of the heim joints on the lower control arms. It really is a balancing act because changing toe changes the camber and vice-versa. Also worn bushings anywhere in that front suspension can give you lots of random deflection as you drive.

[ls1chris]

like to see a few better pics, one from the side of the entire cart. looks like that front spring is done and the cart sitting a rest is way to low, and throwing the geometry out.