|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-11-2012, 03:49 PM | #1 |
Not Yet Wild
Join Date: Jul 2008
Posts: 46
|
1985 club car body swap?
im working on an 85 club car, the fiberglass body needs a little work. my question is will a newer plastic body bolt up or am i better off to do a little work on my factory body? if it will swap, how hard and what will i need?
thanks in advance for help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-11-2012, 07:05 PM | #2 |
Gone Wild
Join Date: Dec 2007
Location: SE Indiana
Posts: 392
|
Re: 1985 club car body swap?
It will swap
|
09-11-2012, 08:08 PM | #3 |
Not Yet Wild
Join Date: Jul 2008
Posts: 46
|
Re: 1985 club car body swap?
thanks. direct swap or lots of modifying?
|
09-11-2012, 09:35 PM | #4 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: 1985 club car body swap?
You'll need 1/4" Spacers under the cowl where the bolts go through to hold the canopy brace to the cowl. You'll also need a front and rear body support for the rear body. The fiberglass was strong enough to support two people sitting on the seat, but the plastic must have aluminum bracing under the front of the seat, and the rear.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Body swap | Gas Yamaha | |||
Body Swap | Gas Yamaha | |||
G1 Body Swap | Design Center | |||
body swap | Gas Yamaha |