homebrew g1 clutch puller ideas?

raaaidvw · 05-20-2013, 07:41 PM

been looking around for a clutch puller for a neighbours g1 but having a hard time paying $55 for one.anyone have any thoughts or specs on what I need.ive read about using a sparkplug but no other specs,saw mention of thread size of m14x1.0 but no real definite answers. any help would be great. I have made a puller for my sleds and ezgo before so hoping this wouldn't be a big deal. thanks

bigstik40 · 05-20-2013, 08:13 PM

This subject comes up from time to time and here is a copy of my answer from a while ago. I have been there - done that!! Best bet is to just bite the bullet and buy one

. Here it is -

NOTE - The correct thread for the clutch puller is 14mm dia. x 1mm pitch and is a very difficult bolt to find in stock anywhere. (I tried !!) Unfortunately, making your own puller is not a good option in the case of the Yamaha engine because of this odd thread. There also have been some posts here suggesting to use a spark plug for the bolt, but unfortunately that thread at 14 mm has a pitch of 1.25 mm and will not work.
Good luck - RAY

yamarancher · 05-20-2013, 08:32 PM

Just take the bolt out of the clutch & drive it like ya stole it. It will come lose!

05-20-2013, 07:41 PM	#1
raaaidvw Not Yet Wild Join Date: Aug 2012 Location: ontario,canada Posts: 26	homebrew g1 clutch puller ideas? been looking around for a clutch puller for a neighbours g1 but having a hard time paying $55 for one.anyone have any thoughts or specs on what I need.ive read about using a sparkplug but no other specs,saw mention of thread size of m14x1.0 but no real definite answers. any help would be great. I have made a puller for my sleds and ezgo before so hoping this wouldn't be a big deal. thanks

05-20-2013, 08:13 PM	#2
bigstik40 Gone Wild Join Date: Sep 2010 Location: Erie, Pennsylvania Posts: 989	Re: homebrew g1 clutch puller ideas? This subject comes up from time to time and here is a copy of my answer from a while ago. *I have been there - done that!!* Best bet is to just bite the bullet and buy one. Here it is - NOTE - The correct thread for the clutch puller is 14mm dia. x 1mm pitch and is a very difficult bolt to find in stock anywhere. (I tried !!) Unfortunately, making your own puller is not a good option in the case of the Yamaha engine because of this odd thread. There also have been some posts here suggesting to use a spark plug for the bolt, but unfortunately that thread at 14 mm has a pitch of 1.25 mm and will not work. Good luck - RAY Last edited by bigstik40; 05-20-2013 at 08:17 PM.. Reason: corrected

05-20-2013, 08:32 PM	#3
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232	Re: homebrew g1 clutch puller ideas? Just take the bolt out of the clutch & drive it like ya stole it. It will come lose!
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232

Similar Threads
Thread	Forum
DIY Clutch Puller	Gas Yamaha
puller for the clutch ?	Gas Club Car
2pg clutch puller help	Gas EZGO
g1 clutch puller	Gas Yamaha
Clutch Puller G1	Gas Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum