Fuel filter not full?. Also a delay starting?

[thecurti]

I had the same problem on my G8...and had to have the starter/generator rebuilt. Definitely checked the wiring and the small wiring connector off the generator for corrosion.

[rb8484]

Originally Posted by sho305

The large wires are for starting, its the small wires out the side not the end. There is a wire diagram posted up in the stickies. IIRC the wires come out of the gen towards the front of the cart.

Here, the green wire and its partner:

So do I test the voltage on those wires?

[sho305]

4.5-5.5 ohms at 68F on a DMM the manual says.

[rb8484]

Originally Posted by sho305

4.5-5.5 ohms at 68F on a DMM the manual says.

Sorry I didnt get back to you sooner, my computer has been down.
Can you explain the process to doing this? Do you just unplug the wires and ohm out the wires coming off the generator? Do this as its is sitting or running? And Im checking ohms and not volts, correct?

[smallblock450sl]

Originally Posted by rb8484

Sorry I didnt get back to you sooner, my computer has been down.
Can you explain the process to doing this? Do you just unplug the wires and ohm out the wires coming off the generator? Do this as its is sitting or running? And Im checking ohms and not volts, correct?

Just unplug the wires, and ohm the wires comeing out of the starter/generator...not running.