|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-13-2013, 08:18 AM | #1 |
Not Yet Wild
Join Date: Sep 2013
Posts: 60
|
Need help with crank seals g1
I ordered a new top end kit with rist pin bearing a crank seals from plowmans and I'm just waiting for parts to get here. I decided to start taking the motor apart to get to crank seals and have run in to a problem. Fan side no problem getting to seal but the clutch side I'm having issues. I removed outer bolt and removed clutch but that's as far as I can get. How can I remove the starter pulley to get to the oil pump cover? I've searched all over and it seams in every thread or web site skips that part.
Please help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-13-2013, 09:10 AM | #2 |
Gone Wild
Join Date: Sep 2010
Location: Covington, Ky
Posts: 203
|
Re: Need help with crank seals g1
Need one of these,clutch puller bolt, they run about 25-30 bucks, most of the site sponsors have them
|
11-14-2013, 10:24 PM | #3 |
Not Yet Wild
Join Date: Sep 2013
Posts: 60
|
Re: Need help with crank seals g1
Well that makes sence
|
11-15-2013, 12:04 AM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Need help with crank seals g1
|
|
|
Similar Threads | ||||
Thread | Forum | |||
G1 crank seals | Gas Yamaha | |||
2pg crank seals and berings | Gas EZGO | |||
I think it needs crank seals | Gas Columbia ParCar | |||
Help with G1 Crank Seals | Gas Yamaha | |||
g1 crank seals | Gas Yamaha |