|
12-30-2020, 07:04 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2020
Location: Dayton, Ohio
Posts: 6
|
Reverse buzzer
Any tips or tricks to quite down reverse buzzer, dont want to get rid of it just not so loud. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-30-2020, 07:06 PM
|
#2 |
|
Gone Wild
Join Date: Jun 2011
Location: Northern Indiana
Posts: 2,827
|
Re: Reverse buzzer
Wrap it in tape / plastic, or replace it with a quieter one. You're right though that those EZGO's have absurdly loud reverse buzzers.
|
|
|
|
|
12-31-2020, 08:38 AM
|
#3 | |
|
Not Yet Wild
Join Date: Dec 2020
Location: Dayton, Ohio
Posts: 6
|
Re: Reverse buzzer
Quote:
 |
|
|
|
|
|
03-18-2021, 05:43 AM
|
#4 |
|
Gone Wild
Join Date: Oct 2008
Location: East Texas
Posts: 586
|
Re: Reverse buzzer
Take a foam ear plug, squeeze it down and insert it in the center hole in the buzzer. Hold your finger over it till it re-inflates. Makes it really mellow.
|
|
|
|
|
07-04-2023, 06:47 PM
|
#5 |
|
Not Yet Wild
Join Date: Jun 2023
Posts: 3
|
Re: Reverse buzzer
I have a 2015 gas RXV. How do I get to the reverse buzzer? It's behind the plate that holds solenoid and the relay. I want to make the buzzer quieter but I can barely touch it with my finger much less put tape on it or put something in it. I see one bolt that holds the plate to the frame and one bolt that holds the buzzer to the plate, but I don't see any way to get a tool on them to remove them. How would I replace it if I needed to?
|
|
|
|
|
07-16-2023, 09:30 AM
|
#6 |
|
Not Yet Wild
Join Date: Jun 2023
Posts: 3
|
Re: Reverse buzzer
Any one?
|
|
|
|
|
07-16-2023, 11:05 AM
|
#7 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,186
|
Re: Reverse buzzer
Did you remove the plastic cover?
|
|
|
|
07-17-2023, 12:53 AM
|
#8 |
|
Not Yet Wild
Join Date: Jun 2023
Posts: 3
|
Re: Reverse buzzer
Yes. The attached diagram is what I see. The buzzer is #8 in the diagram. It's behind the solenoid kit bracket. After looking at it again I'm thinking I need to remove the rear driver side wheel well, but was hoping someone had previously done this.
|
|
|
|
|
07-17-2023, 07:04 AM
|
#9 |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,186
|
Re: Reverse buzzer
I think the buzzer is between the body and the bracket facing forward so don’t think pulling the fender will help.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FnR upgrade with reverse buzzer and half speed reverse | Electric Club Car | |||
| wiring a reverse light to the reverse buzzer? | Gas Yamaha | |||
| Reverse buzzer | Electric Yamaha | |||
| F/r switch help. Reverse buzzer is on in forward and not on reverse | Electric EZGO | |||
| Reverse buzzer sounds even when not in reverse | Columbia ParCar | |||
Linear Mode
