97 ez go won't

7stwman · 11-02-2009, 04:05 PM

Hi everybody!!! I'm a newbie and need some help.
97 ezgo. I bought it with out any batteries.
Put in new batteries. Nothing happened No solenoid click or any noise at all.
I have 37 volts come off my batteries.

I checked the Batty charger switch and the wire was hooked directly to the white wire. That look OK

The pedometers switch in the accelerator switch was bad so I replaced it.
Then the new switch fried.

What would cause this to happen???

Where can I down load a manual???

I would like to take this cart to a race in spring this weekend But it ain't looking good.

COURTESYCART · 11-02-2009, 04:57 PM

check the four pin connector in the harness that comes in the battery compartment. It is between the body and teh f-n-r switch. they are bad about corroding and melting

7stwman · 11-02-2009, 06:56 PM

The four pin connectors look good and clean. Anything else???

COURTESYCART · 11-03-2009, 11:21 AM

the manuals can be downloaded thru this site in the stickys at the top of the page.

7stwman · 11-03-2009, 12:39 PM

Thanks I found the manual!!! Fried another switch today!!! I'll print up the manual tonight and go from there I guess.

I guess I will check the voltage and what it should be at the switch.

11-02-2009, 04:05 PM	#1
7stwman Not Yet Wild Join Date: Oct 2009 Location: Sweeny, Texas Posts: 7	97 ez go won't Hi everybody!!! I'm a newbie and need some help. 97 ezgo. I bought it with out any batteries. Put in new batteries. Nothing happened No solenoid click or any noise at all. I have 37 volts come off my batteries. I checked the Batty charger switch and the wire was hooked directly to the white wire. That look OK The pedometers switch in the accelerator switch was bad so I replaced it. Then the new switch fried. What would cause this to happen??? Where can I down load a manual??? I would like to take this cart to a race in spring this weekend But it ain't looking good.

11-02-2009, 04:57 PM	#2
COURTESYCART Gone Wild Join Date: Nov 2008 Location: Montgomery, AL Posts: 1,463	Re: 97 ez go won't check the four pin connector in the harness that comes in the battery compartment. It is between the body and teh f-n-r switch. they are bad about corroding and melting

11-02-2009, 06:56 PM	#3
7stwman Not Yet Wild Join Date: Oct 2009 Location: Sweeny, Texas Posts: 7	Re: 97 ez go won't The four pin connectors look good and clean. Anything else???

11-03-2009, 11:21 AM	#4
COURTESYCART Gone Wild Join Date: Nov 2008 Location: Montgomery, AL Posts: 1,463	Re: 97 ez go won't the manuals can be downloaded thru this site in the stickys at the top of the page.

11-03-2009, 12:39 PM	#5
7stwman Not Yet Wild Join Date: Oct 2009 Location: Sweeny, Texas Posts: 7	Re: 97 ez go won't Thanks I found the manual!!! Fried another switch today!!! I'll print up the manual tonight and go from there I guess. I guess I will check the voltage and what it should be at the switch.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum