|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-19-2010, 09:21 PM | #1 |
Not Yet Wild
Join Date: Aug 2007
Posts: 13
|
Need help finding parts
I have a 1981 3 wheeled cart. I am totally restoring (or trying to). I am looking for some hard to find parts, any help locating would be greatly appreciated.
Shocks for front wheel (everything found is listed for 82-90, will these work on mine?) Pinion Seal (where the driven clutch attaches to diff) Driven clutch plastic buttons (not the one on the cover) Points (I have found them for up to a 79, but not the same as mine) The metal trim that holds the rubber side mould at the bottom of the cart (basically looks like a aluminum strip with bolt built into the strip). I have done a lot of searching, I have bought many parts already. I have the motor rebuilt, the cart is totally disassembed, and I am painting it right now. Trying to locate these parts to start putting it back together. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-20-2010, 08:17 AM | #2 |
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: Need help finding parts
What make of cart and where are u located? There are two 3 wheeled carts for sale near here.
|
09-20-2010, 08:27 AM | #3 |
Not Yet Wild
Join Date: Aug 2007
Posts: 13
|
Re: Need help finding parts
It is a 1981 ezgo 2 cycle gas. I am located in Kearney, MO (close to Kansas City)
|
09-20-2010, 08:58 AM | #4 |
EZ Like Sunday Morning
Join Date: Jun 2009
Location: Owatonna, Minnesota
Posts: 465
|
Re: Need help finding parts
Probably too far away
|
09-20-2010, 08:32 PM | #5 |
Not Yet Wild
Join Date: Aug 2007
Posts: 13
|
Re: Need help finding parts
I took a chance and ordered the shocks, will post and let everyone know if they fit. Found the plastic buttons for the clutch. Also taking a chance on the pinion seal, found 1 for a 83 to 86, will see if it fits.
Still would like to find the strip to hold the rubber moulding on. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Trouble finding parts for electric Club Car | Electric Club Car | |||
help finding this part!!! | Electric Yamaha | |||
Finding vin# | Gas Yamaha | |||
Finding a used Club Car | Electric Club Car | |||
Need Help Finding Parts | Gas EZGO |