Reducer Help

[Coheed]

Ladies and Gents, looking to swap out the 10 amp reducer with a reducer from Scotty, so my cart has the ultimate light kit with the bucket harness, I tracked the connections at the reducer but want a way ahead for the 30 amp reducer I’ll be putting in it’s place (not actual place as i intend to mount it to metal behind the headlight. I intend to install the fuse block and bus bar.

Looking to put underglow lights and USB plug on in the near future, may look at some LOW AMP marine Bluetooth speakers

[NoleFan4Ever]

Sounds like you have it planned out fairly well....

[yawood]

If you can, mount the new one with the fins oriented vertically and you will get a better air flow for cooling.

What do you mean by "want a way ahead"?

[Coheed]

Originally Posted by yawood

If you can, mount the new one with the fins oriented vertically and you will get a better air flow for cooling.

What do you mean by "want a way ahead"?

So i am not sure how to wire in the new one... i have looked at the diagram on CU but that is without a bucket harness.

[yawood]

Originally Posted by Coheed

So i am not sure how to wire in the new one... i have looked at the diagram on CU but that is without a bucket harness.

Just wire it in exactly the same way your original was wired (assuming your original was wired correctly). Where the original 48V wires went that's where your new wires will go. If it is more convenient you could just attach your new wires to the old ones. You said that you wanted to move locations so just add enough wire to get back to the other connections.

For your additional accessories, down the track, I suggest you put in a fuse box for the positives and a negative buss for the negatives. Like this picture.