|
07-04-2020, 10:24 AM
|
#1 |
|
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Full length roof
So I got what I feel is a pretty good deal on a Double Take full length roof however it doesn’t seem as though it was designed to mount with the metal style rear seat kit that I have. Anyone made this style full length roof work with the metal type rear seat kit.
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-04-2020, 12:00 PM
|
#2 |
|
Golf Cart? oops 😉
Join Date: Jun 2014
Location: Motown
Posts: 583
|
Re: Full length roof
if you just want a quick fix to your deal...
run down to home depot. they have a simpson strong tie display in lumber. pick up a T or reinforcement plate and a handful of drill point zip screws    |
|
|
|
|
07-04-2020, 01:15 PM
|
#3 |
|
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Full length roof
Good idea. I just bought a piece of 1 aluminum angle that I will scab on to the existing down tube and bolt in place
|
|
|
|
|
07-04-2020, 04:00 PM
|
#4 |
|
Gone Wild
Join Date: May 2018
Location: Fuquay NC
Posts: 181
|
Re: Full length roof
 This  Is what I came up with. Should work fine. Hard to see after painted and back seat installed |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Yamaha G1 Only Runs with full choke and full Throttle | Gas Yamaha | |||
| Full steel roll bar/ roof | Design Center | |||
| full forward to full reverse... a blown fuse? | Electric golf carts | |||
| full length shock part #'s for 5" lift | Gas EZGO | |||
| 93 Gas EzGo full length shock sizes/part numbers? | Lifted Golf Carts | |||
Linear Mode
