|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-12-2020, 08:16 PM | #11 |
Not Yet Wild
Join Date: Mar 2020
Posts: 32
|
Re: YDRE 8:1 gear change
thread revival:
I have a 2005 G22A gas with the dana axle. would the 8:1 gears be too tall for the stock gas motor? I know you can install torque spring for the CVT drive to increase torque but would that be sufficient to push the 8:1? will be lifted with 22.5 tires and madjax 150s rear passenger setup. if 8:1 also too tall for the gas motor to push will go with the 10:1 as suggested in this thread. looking for top speed of 35 mph.... thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-13-2020, 10:28 AM | #12 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: YDRE 8:1 gear change
This thread (and the 10.5:1 gears) are referring to electric vehicles, does not apply to gas. And with your wheels & tires, 8:1 gears are gonna be a total dog with stock motor.
|
04-17-2020, 12:53 PM | #13 |
Not Yet Wild
Join Date: Jul 2017
Posts: 9
|
Re: YDRE 8:1 gear change
G19e is counter gear pressed onto the high speed gear
So I bought high speed gears for my Yamaha G19e cause the large gear had a flat spot and the 2nd gear that came with it looks like it goes directly above with the counter gear. my problem is how do I get the counter gear off or should I just put the old one back in that has the counter gear on there? |
04-17-2020, 01:16 PM | #14 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: YDRE 8:1 gear change
Those G19e gears arent gonna work in a dana gas axle . But, if you already know more about gas & electric dana axles than I do, you dont need my help.
|
04-17-2020, 01:28 PM | #15 |
Not Yet Wild
Join Date: Jul 2017
Posts: 9
|
Re: YDRE 8:1 gear change
I have a Yamaha G19e Electric 48v ... I bought gears for my specific cart. just not sure if I need to remove the counter gear from the other gear? not sure if this matters but the smaller new gear has 33 teeth and the old one has 31. Can I just put the old smaller gear back in ?
|
04-17-2020, 04:32 PM | #16 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: YDRE 8:1 gear change
No, both must be swapped, or itll only last a few days. Sorry about the other thing, I thought we were back to putting electric HS gears in a gas axle.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2010 ydre high speed gear change | Electric Yamaha | |||
8:1 Gear Change - Ring Gear Torque Value? | Electric EZGO | |||
Gear Change | Electric Club Car | |||
G1 Gear Change help | Gas Yamaha | |||
Gear Change | Electric EZGO |