|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-20-2019, 11:42 AM | #21 | |
Gone Wild
Join Date: May 2011
Location: Pittsburgh
Posts: 2,953
|
Re: G2 broken resistor
Quote:
If you have one long resistor that has "bridges" coming off of it depending on what speed you are in then only the used portion of that resistor will get warm. Your description indicates that this is your set up? If you have multiple resistors, one for each different speed, then each resistor being used should get evenly warm. I am not sure what type of setup your specific cart has. |
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-21-2019, 01:17 AM | #22 |
Not Yet Wild
Join Date: Sep 2019
Location: NC.
Posts: 19
|
Re: G2 broken resistor
I believe from your description it's bridged and working properly. Definitely talking with Atmosphere. If this thing didn't have the sentimental aspect and represent a way for my sick wife to get around i doubt I'd put the time in on such an old cart but I'm determined to get it back on track. I am also really enjoying tinkering with it. I have a couple other hobbies chainsaws and firearms but this may be a new thing to spend time on. I have made a few upgrades for safety that's came out nice but if it won't run its all for nothing.
|
03-29-2021, 10:37 PM | #23 |
Not Yet Wild
Join Date: Mar 2021
Posts: 4
|
Re: G2 broken resistor
Is this Yamaha G2 resistor still for sale? My father used to "rest" his foot on the accelerator and I think this is what burned it out.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
'85-'86 G2E resistor wiper arm broken | Electric Yamaha | |||
88 EZGO electric resistor cart resistor problem | Electric EZGO | |||
broken rod 295 | Gas EZGO | |||
Pre-charge resistor for resistor carts? | Electric EZGO | |||
5TH speed resistor has a burned mark on resistor board and melted the wire | Electric EZGO |