|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-22-2020, 04:26 PM | #1 |
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Alltrax SPM 72500 - Buss Bar Over temperature - After hosing off battery tops?
I just hosed off my battery tops and spray got onto controller. I used my blower to get all the water off, but now I'm getting an error blinking code and fan kicking in on my Alltrax controller.
The error code is: Buss Bar Over temperature I checked to make sure all cables were connected and tight and in tact but not able to get her going... any ideas on how to resolve this would be greatly appreciated. I'm wondering if I just need to let it dry out for a few days.... Thanks in advance :) |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-22-2020, 09:11 PM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Alltrax SPM 72500 - M- Over temperature - After hosing off battery tops?
Let it dry out & you'll likely be fine.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR-72500 vs SR-48600 | Electric EZGO | |||
Bombardier NEV Battery Temperature Sensor | Electric golf carts | |||
Swapping Alltrax AXE 7245 450a for Alltrax SR 72500 500a | Electric EZGO | |||
Battery temperature sensor | Electric EZGO | |||
Battery Cable Temperature | Electric EZGO |