i really need some help

FIXEROFCARTS · 03-09-2010, 10:49 PM

You can be off by 4 teeth and it will still run.

thornhillchris · 03-10-2010, 10:15 PM

then what else could it be?

ruredy · 03-10-2010, 10:32 PM

could be a valve not seating
I'm not sure I believe the running with 4 tooth off thing.

thornhillchris · 03-12-2010, 10:03 PM

i dont know what wrong with this **** thing timings dead nuts valves set runs but wont build enough rpms to move pops and sputers

thornhillchris · 03-12-2010, 10:04 PM

also cleaned carb real good all ports clean

ruredy · 03-13-2010, 07:11 AM

are you sure the carb AND the spacer have a good seal and isn't sucking air

when there is no answer to the question then a logical assumption is probably the best bet. you had valves/head issues to begin with, you "fix" it but you still have the same problem. It's probably still a valve/head issue that just wasn't fix. valves not sealing or cam timing off is really the only reason I can see for gas to be blowing out the carb.
there are a few other possibilities but the chances of them happening are very remote. 1 Timing gears are press fit, if they have become off or shifted then the timing may not be right. 2 your ignition system has gone stupid and is firing all the time for no reason.

thornhillchris · 03-13-2010, 09:22 AM

i pulled the plug wire and plug to see the spark while its sparking the spark looks like it starts to fade after a second

03-09-2010, 10:49 PM	#11
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: i really need some help You can be off by 4 teeth and it will still run.

03-10-2010, 10:15 PM	#12
thornhillchris Not Yet Wild Join Date: Mar 2010 Location: arizona Posts: 18	Re: i really need some help then what else could it be?

03-10-2010, 10:32 PM	#13
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: i really need some help could be a valve not seating I'm not sure I believe the running with 4 tooth off thing.

03-12-2010, 10:03 PM	#14
thornhillchris Not Yet Wild Join Date: Mar 2010 Location: arizona Posts: 18	Re: i really need some help i dont know what wrong with this **** thing timings dead nuts valves set runs but wont build enough rpms to move pops and sputers

03-12-2010, 10:04 PM	#15
thornhillchris Not Yet Wild Join Date: Mar 2010 Location: arizona Posts: 18	Re: i really need some help also cleaned carb real good all ports clean

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-13-2010, 07:11 AM	#16
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: i really need some help are you sure the carb AND the spacer have a good seal and isn't sucking air when there is no answer to the question then a logical assumption is probably the best bet. you had valves/head issues to begin with, you "fix" it but you still have the same problem. It's probably still a valve/head issue that just wasn't fix. valves not sealing or cam timing off is really the only reason I can see for gas to be blowing out the carb. there are a few other possibilities but the chances of them happening are very remote. 1 Timing gears are press fit, if they have become off or shifted then the timing may not be right. 2 your ignition system has gone stupid and is firing all the time for no reason.

03-13-2010, 09:22 AM	#17
thornhillchris Not Yet Wild Join Date: Mar 2010 Location: arizona Posts: 18	Re: i really need some help i pulled the plug wire and plug to see the spark while its sparking the spark looks like it starts to fade after a second