Rev limiter, zip tie, & engine protection

[93yellowclubcar]

Originally Posted by pachanga90

For the leafs,either find a stock set and use a long leaf or the main with the eyes cut off,and add it to your springs,or have a spring shop add one for you.Hope this helps.

Good info! I had HD springs on the rear of my cart and ended up taking the short leaf out, they're just too stiff!

And PIB, you think the front bolts are bad on a gasser, try it on a sparky! The batteries aren't nice to the mounts, so even if you cut the nut off, which is a major pain because of its location, you still have to get the bolt out somehow, which is darn near impossible because it's rusted in place. Even driving it out with a punch is next to impossible.