|
05-10-2012, 03:22 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2011
Location: East Liverpool Oh
Posts: 74
|
88 ezego
Hi guys,
I just got an 88 ezego and know not a thing about these carts ! One of my wifes truck drivers passed last fall and she is trying to help his wife out.. How do you put this cart in service mode ? I need to go over it !  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-10-2012, 06:50 PM
|
#2 |
|
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: 88 ezego
As to "Service Mode" - I'm not sure what you mean (unless it's an electric cart, in which case you're probably going to want to head over to the "EZGO Electric" posts) ...
The 88 Gas carts are a unique situation, they are based on the 2PG engine *but* have several unique designs that make a lot of the parts, etc strictly 1988 only. As to the basics, you can hit the stickies and download the wiring diagram for 87's (which is the same) and most of the actual specs you'd want to test (IE compression, etc) are the same as the 2PG's. Let me know if you need a carb diagram, manual, etc (I have PDF's of all that stuff for the 88's I can send you if you need) - the basic starting point as always though is gas, spark, compression, crankcase pressure ... A little info on what the cart is currently doing (or NOT doing) would help us help You !!! DZ |
|
|
|
|
05-10-2012, 07:25 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2011
Location: East Liverpool Oh
Posts: 74
|
Re: 88 ezego
Brew,
Thanks for the reply..It seems to run good ..would like to put in neutral and run it ( gas ) I have 2 ccs and I'm used to them We paid to much for it but it's helping the lady out ....gonna try and post picks this weekend. |
|
|
|
|
05-11-2012, 04:43 AM
|
#4 |
|
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: 88 ezego
Hi Michael, Is this a EzGo or a Club Car we're working on? If in fact its an EzGo they aren't like C.C. The 2pg don't offer a service mode like the 91 and up Ezgos do. You have to just jack the rear end up when working on them. Or take the drive belt off to do the work.
|
|
|
|
|
05-11-2012, 06:39 AM
|
#5 |
|
Not Yet Wild
Join Date: May 2011
Location: East Liverpool Oh
Posts: 74
|
Re: 88 ezego
Thanks Doc
Kinda what i thought..Never had an ezgo or worked on one .  |
|
|
|
|
05-11-2012, 03:31 PM
|
#6 |
|
Hammer Down !!!!
Join Date: Jun 2010
Location: Lake Geneva, WI
Posts: 2,681
|
Re: 88 ezego
Now I get it - yeah, just roll the belt off and you'll be fine. The 88 2PG has no "gearing" so to speak, the engine runs backwards for reverse or normally for forward.
Again, hit me up if I can help w diagrams, etc |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 97 ezego | Electric EZGO | |||
| ezego power | Electric EZGO | |||
| Wiring diagrams for 88 EZEGO | Electric EZGO | |||
Linear Mode
