99 regen 2/pd plus motor and controller upgrade

[scooterman]

I wouldn't be too concerned from a few glitches, there is so many variables that could cause this. In most cases these controllers are as reliable as any and preform as well as Scotty has shown us with his personal carts and also from the feedback I've seen from others. Also know that they have a reputation to keep and they will resolve the issue, it happens with the best.

[bzaayer22]

Glad you went into detail Scotty.. I was afraid to pour to much information out there! Appreciate your help!!

Originally Posted by scottyb

It's an incorrect guess.
The Alltrax control reads any MCOR signal and establishes it as 0-100%. And if your signal changes as MCORS can do over time, you can ask the control to re-calibrate to accommodate the MCOR unit.
Nobody is going to be able to tell you what the problem is with this cart at this time. Software engineers are pouring over the data collected from 2 different models which exhibited similar characteristics. It's a glitch. They will solve it. Thank you Brandon for your patience.