2 ga battery cables upgrad ??

[Tommy T]

I got my 2 ga battery cables. I was woundering if any of you use the felt,
( red and green ) pads they sell in auto parts store's? I have used on my Trucks. Or On our work trucks we use a Terminal sprey . This is the red sticky spray to stop corrosin. It looks like mort of the pictures on here do not have anything on the terminals . I just want to do it the best way. What is recommended ?? Thank You for your input.

[biggie1976]

Using something is better than most do. Sure it will be fine.

[scooterman]

I use the spray, little messy though.

[Sergio]

Definitely not the felt!

You do not want anything between the cable lugs and the battery post surface, metal or otherwise.

You can get a piece of newspaper or cardboard and tear an appropriate size opening and use the paper as a shield for a clean spray job.

I use the spray as well.

[Tommy T]

was thinking dieltric grease, could also be used. I will look out in the shop. I am sure I have one or more things for this, Thank you. Making it the way I want it a little at a time.

[Tommy T]

Thank you Sergio.

[Bowslayer]

I use the spray but I spray it into the cap and then use a small brush to apply it to the terminals. No overspray that way.

use spray
the grease is good but the heat of charging over time will melt it away

[Tommy T]

Thanks Ya'll* on Most of the pictures you can't see anything. Hope to have time this weekend when I get out of work. Just the next step of many more to come. And as soon as I can afford it A ground pounder Will be under the knife looking for 40+MPH. Crash Test, You will end up getting sick of me lol.

thanks to you the 6" lift is a go

got a ton of carts to do if you want to learn i can teach
carts to fix
01 controller
97 controller
01 centering kit
97 brakes
94 lights & brakes
02 no go
85 slow
93 batteries
84 motor & batteries