|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-22-2013, 08:44 PM | #11 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,291
|
Re: 99 txt 36 volt cable to motor glowing red hottt
If the cables are OEM 6g crimped, it's time for some proper long-life welding cable upgrdes. The OEM cables were designed to last as long as the first set of batteries, operating on the golf course with two men and their clubs.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-23-2013, 06:25 AM | #12 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 99 txt 36 volt cable to motor glowing red hottt
If you continue to troubleshoot, don't let the motor stud(s) get too hot or you'll be replacing parts in your motor as well. The motor studs pass through a plastic insulator, and it's possible that you may have already compromised that.
|
01-23-2013, 06:48 AM | #13 |
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: 99 txt 36 volt cable to motor glowing red hottt
ok I hope that did not happen. I have some new cable and ends and Im going to change them today
|
01-23-2013, 01:24 PM | #14 |
Gone Wild
Join Date: Aug 2011
Location: Bunnell, Florida
Posts: 2,408
|
Re: 99 txt 36 volt cable to motor glowing red hottt
Two things for thought, 1- if you have a " tow-run " switch, place it it " tow " before doing any work on the electrical system! 2- There are two nuts on the motor with the cable between them. Make absolutely sure you hold the bottom nut while removing the top one! Failure to do this may let the whole stud turn resulting in a trip to a motor shop! I bought a cheap Chinese open end wrench and ground the sides until it would just slip over the bottom nut!
|
01-23-2013, 01:40 PM | #15 |
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: 99 txt 36 volt cable to motor glowing red hottt
Thank you so much simple man. I have removed both the cables and the studs are pretty much junk. I removed the electric motor now and I am going to take it to the electric shop to find out if there is an issue inside the motor and have the two studs replaced. This cart has been run hard and put up wet lol
|
01-23-2013, 01:49 PM | #16 |
Gone Wild
Join Date: Jan 2013
Location: Turnersville, South Jersey
Posts: 220
|
Re: 99 txt 36 volt cable to motor glowing red hottt
I'm new here, but keep everything clean & tight! Let us know how you make out. I'll stay tuned!
|
01-23-2013, 02:46 PM | #17 |
Gone Wild
Join Date: Nov 2012
Posts: 334
|
Re: 99 txt 36 volt cable to motor glowing red hottt
OK I will keep this updated for sure.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
hot glowing resistor | Electric EZGO | |||
ez go glowing hot resistor | Electric EZGO | |||
glowing resistor Please Help | Electric EZGO | |||
glowing resistor | Electric Club Car |