|
04-25-2013, 07:46 AM
|
#1 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Greensboro GA.
Posts: 5
|
Upgrading
I have a 2006 txt series cart and would like to know if i can upgrade to 400amp heavy duty solenoid and heavy duty f&r switch before i upgrade the controller and use until i can come up with money for controller ?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-25-2013, 09:15 AM
|
#2 |
|
Techno-Nerd
 Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: Upgrading
That will work.
 If you haven't already, the high current cables can also be upgraded before upgrading the controller. The problems happen when the controller is upgraded first and the original (undersized) cables, solenoid and F/R switch can't handle the higher current. A similar set of problems happen when taller tires are installed before upgrading the drive system. Tall tires take more amps to turn and the original drive system can't cope with the increased demands. |
|
|
|
|
04-25-2013, 09:24 AM
|
#3 |
|
Not Yet Wild
Join Date: Feb 2012
Location: Greensboro GA.
Posts: 5
|
Re: Upgrading
Thanks,JohnnieB and i have done the cable upgrade already.
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| upgrading 36V PDS | Electric EZGO | |||
| Upgrading G16 | Gas Yamaha | |||
| Upgrading ?'s | Electric EZGO | |||
| upgrading to 72v | Extreme DC! | |||
| Upgrading 04 TXT | Electric EZGO | |||
Linear Mode
