![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Gone Wild
![]() Join Date: Dec 2013
Location: Connecticut
Posts: 251
|
![]() I recently purchased a rear hitch for my 2008 1/2 Precedent. No instructions included, of course. It seems I have to remove (4) J-clips, M8x1.25, p/n 102298601. These clips are mounted on each side of the bumper brackets (p/n 103677401 and 402) and appear to slip onto the molded plastic of the rear bumper. I've removed the (4) bolts, however the clips seem to be wedged into place. Has anyone had experience removing these clips and if so, I would appreciate any tricks to remove them without damaging or breaking the plastic bumper...thanks in advance...
![]() |
![]() |
![]() |
![]() |
#2 |
Not Yet Wild
Join Date: Jan 2015
Posts: 11
|
![]() i removed those same j clips today on my 2008 precedent to install a trailer hitch. they are not attached or bolted to anything so i just yanked them using a thin screwdriver. they are very difficult to remove but they came off without any damage to the plastic and i was able to attach the trailer hitch.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
![]() Join Date: Aug 2014
Location: Northern Michigan
Posts: 21
|
![]() Can you post pictures of your installation?
Sent from my tractor seat. |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
G-22 front clip mounting question | Gas Yamaha | |||
Front Clip Question | Gas Harley Davidson | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Electric EZGO | |||
EZ-GO Marathon front cowl removal -- And TXT body removal | Gas EZGO | |||
G1 rear Body work question | Design Center |