![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Not Yet Wild
Join Date: Jul 2010
Location: Port Aransas, TX
Posts: 35
|
![]() I have a 2007 drive that is very jerky on takeoff and stop. When I give it the gas it is not a smooth takeoff. I checked the throttle cable at the gas pedal and there is no slack, I have it adjusted all it can go at the gas pedal and it still has tension on the cable. Is there another area it can be loosened at?
I have the speed spring on it and the nut on the governor is loosened all the way to try to relieve the tension and stop backfiring, that did not help. The drive clutch moves very smooth and I just tore the driven clutch apart and put a new factory spring on it, it also seems to operate fairly smooth. Any suggestions? |
![]() |
![]() |
![]() |
#2 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 18,135
|
![]() Drive belt may be loose or worn out.
|
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
#3 |
Sometime's............
![]() ![]() Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,888
|
![]() Tom @ CPP (a very respected site sponsor), has a kit for upgradeing the sickly "Team" primary and secondary clutch's. May want to check out his site or give him a call. How did you get that primary apart? I bought the very expensive Yamaha service tool and I couldn't get one to budge
![]() |
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: Jul 2010
Location: Port Aransas, TX
Posts: 35
|
![]() I only took the secondary clutch apart, I replaced the primary with a new clutch and it did nothing.
My main problem is the throttle cables, I can not get enough slack in them to get the cart to take off smooth. I replaced the belt and no change. |
![]() |
![]() |
![]() |
#5 |
Sometime's............
![]() ![]() Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,888
|
![]() Sorry, didn't read your first post very well I guess. You can adjust accelerator cable #2 (it's under the starter/generator and not fun to do). You really do need slack in cable #2. If you need a picture let me know. Sorry you had to change so many parts and not fix the problem.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
will new MCOR solve jerky takeoff? | Extreme DC! | |||
6" lift created jerky takeoff | Gas Club Car | |||
G16 clunks on takeoff | Gas Yamaha | |||
No Power on Takeoff | Gas EZGO |