![]() |
![]() |
#1 |
Not Yet Wild
Join Date: Mar 2013
Posts: 9
|
![]() is a sealing compound needed when installing a crankshaft seal ? thx
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Test before replacing
![]() Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,574
|
![]() You should use green Loctite. I also staked my edges with a hammer and punch.
EDIT: This is an example of a staked bearing. I only made two dimples for the seal. http://www.americanprecisionassembly...013/02/401.jpg |
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Mar 2012
Location: spokane,wa
Posts: 974
|
![]() Blue loctite works too.
Sent from my iPhone using Tapatalk |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
crank seal | Gas EZGO | |||
crank seal help?? | Gas EZGO | |||
Not just crank seal replacement on G1 | Gas Yamaha | |||
g1 blowing crank seal out | Gas Yamaha | |||
crank seal question g-1 | Gas Yamaha |