![]() |
![]() |
#1 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
![]() Wondering what pulsar coil everyone using on the hei conversion
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Test before replacing
![]() Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,573
|
![]() The original pulsar is used. The ignitor is what gets replaced.
|
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
![]() OK this what I've got I bought someone's cobbled up mess trying to get it fixed right for the wife and kid to drive i did the he I conversion and someone already replaced pulsar I ohm it read 154 and just put new igniter and he coil as conversions states but can't get it to spark also see pics where the ignitor has a wire coming off of the mounting hole where does it go
|
![]() |
![]() |
![]() |
#4 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
![]() |
![]() |
![]() |
![]() |
#5 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
![]() that wire goes to a good ground, it grounds the hei metal plate,which should be mounted on metal, preferbly aluminum for a heatsink.
|
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
Join Date: Jun 2015
Posts: 29
|
![]() OK I've just got mine mounted to the frame is that OK ?
|
![]() |
![]() |
![]() |
#7 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
![]() well you can leave it , but when you get it running, check the hei and see if its getting hot, if hot to touch ,remount to a aluminum bar for better cooling.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
G9 Pulsar Coil HELP ME PLEASE!!! | Gas Yamaha | |||
G9 pulsar coil | Gas Yamaha | |||
Pulsar coil | Gas EZGO | |||
Pulsar coil | Gas EZGO | |||
pulsar coil | Gas Yamaha |