lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 05-14-2012, 02:47 PM   #1
Bluefinger
Not Yet Wild
E-Z-GO
 
Join Date: Apr 2012
Location: Dallas (Murphy) Texas
Posts: 8
Default Which side of switch is "switched power" on an '09 PDS

In other words, which side of the switch has power when the switch is on, White or White/Yellow?

I'm installing a voltage reducer, lights, etc. on an '09 EZ-GO TXT PDS and before I cut the wrong wire I'd like to be sure. I've checked the wiring diagrams I can find, but they seem to be for older carts with different wiring colors.

Thanks,
Bluefinger

Also, I've made a introduction post in the Introduction Forum.
Bluefinger is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 05-14-2012, 04:38 PM   #2
Bluefinger
Not Yet Wild
E-Z-GO
 
Join Date: Apr 2012
Location: Dallas (Murphy) Texas
Posts: 8
Default Re: Which side of switch is "switched power" on an '09 PDS

I made a pigtail that plugs into the switch without having to cut the wires, but I got the same result on either lug. My lights only work if the headlight switch is on, the keyed switch is on, and the direction selector is in either Forward or Reverse, the lights go out if you switch the direction selector to Neutral.

I will eventually be adding some sort of sound system, so I want to be able to run it with the key on and cart in Neutral.

Any help is appreciated.
Bluefinger is offline   Reply With Quote
Old 05-14-2012, 08:29 PM   #3
Bluefinger
Not Yet Wild
E-Z-GO
 
Join Date: Apr 2012
Location: Dallas (Murphy) Texas
Posts: 8
Default

Slight clarification, if I tie into the White wire at the key switch the directon selector, keyed switch, and headlight switch must all be on to get lights. If I tie into the White/Yellow wire only direction selector and headlight switch need to be on to get lights.

Is there a better place to connect my voltage reducer signal wire (K1) to get accessories to work with just the keyed switch?

Thanks
Bluefinger is offline   Reply With Quote
Old 05-16-2012, 05:05 PM   #4
Bluefinger
Not Yet Wild
E-Z-GO
 
Join Date: Apr 2012
Location: Dallas (Murphy) Texas
Posts: 8
Default Re: Which side of switch is "switched power" on an '09 PDS

Bueller?... Bueller?... Bueller?
Bluefinger is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Any way to put a "maint mode switch" in? Gas Club Car
Putting "power spring" in a Yamaha G1 Gas Yamaha
Power "Bucking" Issue Electric Club Car
93 Marathon"Low power" in forward" Electric EZGO
"High Speed Switch" ? Electric Club Car


All times are GMT -5. The time now is 11:37 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.