![]() |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Feb 2013
Location: Oklahoma
Posts: 31
|
![]() I tested the Pulsar coil on my 85 EZ GO no reading on ohms and no voltage as the motor turns over. Do I need to remove the motor again to get to the pulsar coil ? Is there a downloadable instruction manual for this cart I believe it has the 2pg robin engine
![]() |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not Yet Wild
![]() Join Date: Feb 2013
Location: Oklahoma
Posts: 31
|
![]() just have one spark when I hit gas pedal then nothing
![]() |
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
![]() The pulsar can be removed in the cart. Remove the blower housing, then the fly wheel, and your in.
Good luck, Bob |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
pulsar coil? | Gas EZGO | |||
pulsar coil | Gas Yamaha | |||
setting pulsar coil ? | Gas EZGO | |||
Pulsar coil | Gas EZGO | |||
Pulsar coil location | Gas EZGO |