|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-17-2016, 09:12 AM | #11 |
Not Yet Wild
Join Date: Mar 2016
Posts: 10
|
Re: 2006 EZ GO PDS - Reverse not working
When using a DMV tester to measure the voltage on J1 Pin-2, do I simply unplug the J1 plug and insert prob in both male and female sides of Pin-2? Is it that simple? Additionally, what should the voltage read on a 36V PDS cart?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-17-2016, 09:20 AM | #12 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2006 EZ GO PDS - Reverse not working
You are looking for pack voltage. Positive. Place the neg test lead on the battery pack main - and the pos. test lead on the battery pack +. This is the pack reading, it should be between 36 and 38v or so.
keep the - test lead on the pack - and probe the J1 pins. With the key on, cart in gear(F), you should find power at every pin with a red line to it below. AND the solenoid should click. |
03-17-2016, 09:25 AM | #13 | |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 2006 EZ GO PDS - Reverse not working
Quote:
With the connectors connected to the controller, insert the probe tip into the backside on the MOLEX connector. |
|
03-17-2016, 09:36 AM | #14 |
Not Yet Wild
Join Date: Mar 2016
Posts: 10
|
Re: 2006 EZ GO PDS - Reverse not working
If I put one probe in the J1 Pin #2, where does the other probe go?
|
03-17-2016, 10:01 AM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2006 EZ GO PDS - Reverse not working
|
03-17-2016, 01:37 PM | #16 |
Not Yet Wild
Join Date: Mar 2016
Posts: 10
|
I have power to the J1 plug pin 2, 4, 7, 8, but not 9 when powered in forward. What does that tell us?
Sent from my iPhone using Tapatalk |
03-17-2016, 01:54 PM | #17 |
Not Yet Wild
Join Date: Mar 2016
Posts: 10
|
Forgot to mention buzzer comes on when probing 9 pin but no power showing
Sent from my iPhone using Tapatalk |
03-17-2016, 02:08 PM | #18 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2006 EZ GO PDS - Reverse not working
Pin 9 is the key switch loop, either it is intermittent or you got a bad reading. I suppose it is possible the control is failing to power the key in one direction but it is not very common. Can you retest a FEW times to be sure power's consistently not there?
|
03-17-2016, 02:23 PM | #19 |
Not Yet Wild
Join Date: Mar 2016
Posts: 10
|
No power to 9 just the buzzer when powered on and in Forward. I retested several times.
Sent from my iPhone using Tapatalk |
03-17-2016, 03:33 PM | #20 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
|
Re: 2006 EZ GO PDS - Reverse not working
Can you confirm no power on 9 and 8 ? If yes then I feel the control has failed.
|
Tags |
ezgo, pds, reverse |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Reverse not working | Electric EZGO | |||
Reverse Not Working after F&R Replaced | Electric EZGO | |||
Reverse Not Working!! | Electric Club Car | |||
2006 ez go pds quit working | Electric EZGO | |||
Reverse not working | Gas Yamaha |