|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
04-17-2017, 10:32 AM | #1 |
Not Yet Wild
Join Date: Dec 2016
Location: Davie FL
Posts: 72
|
Brake light install problems
I've installed an upgraded light kit which includes brake lights everything works except Brake lights.
Kit included turn signals headlights tail lights horn and brake |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-17-2017, 10:42 AM | #2 |
Not Yet Wild
Join Date: Dec 2016
Location: Davie FL
Posts: 72
|
Re: Brake light install problems
Sent from my iPhone using Tapatalk |
04-17-2017, 03:51 PM | #3 |
Not Yet Wild
Join Date: Dec 2016
Location: Davie FL
Posts: 72
|
Re: Brake light install problems
Any help is greatly appreciated
Sent from my iPhone using Tapatalk |
04-17-2017, 05:36 PM | #4 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Brake light install problems
That timer don't look like it is wired correctly.
|
04-17-2017, 05:41 PM | #5 |
Not Yet Wild
Join Date: Dec 2016
Location: Davie FL
Posts: 72
|
Re: Brake light install problems
How should it look
Sent from my iPhone using Tapatalk |
04-17-2017, 06:54 PM | #6 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Brake light install problems
Where is the positive 12 volts coming from. Looks like one negative wire coming from brake pedal switch to positive input to timer. I'm confused
|
04-17-2017, 07:08 PM | #7 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Brake light install problems
The timer module wiring looks correct:
Negative from Cart Harness (black wire) goes to Timer module (- connection).Check if You have +12v on the Cart Harness +12v wire (Red wire with Female Bullet connector). If not, what is your +12v power source? |
04-17-2017, 08:35 PM | #8 |
Old Sky Soldier
Join Date: Dec 2011
Location: Kentucky
Posts: 3,881
|
Re: Brake light install problems
Ok, it looked to me like only one wire to brake switch. Sergio is the man, you are in good hands now.
|
04-18-2017, 09:33 AM | #9 |
Not Yet Wild
Join Date: Dec 2016
Location: Davie FL
Posts: 72
|
Re: Brake light install problems
Sergio it's not reading any power on the brake harness all over lights work but no power to that female bullet connetor
Sent from my iPhone using Tapatalk |
04-18-2017, 09:36 AM | #10 |
Not Yet Wild
Join Date: Dec 2016
Location: Davie FL
Posts: 72
|
Re: Brake light install problems
I put a temp power up directly to the brake harness and it works fine
Sent from my iPhone using Tapatalk |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Precedent brake light pad install question | Electric Club Car | |||
83 G1 brake light switch install help | Gas Yamaha | |||
PDS Turn Signal & Brake Light Install | Electric EZGO | |||
Brake light switch install | Gas EZGO | |||
Brake light install | Electric Yamaha |