Leaking gas

Jeff_Walter · 08-02-2018, 09:08 PM

I want to say no the guy fixed the motor portion said he bypassed it to get more speed out of it. Didn’t seem to give me much more anyways.

Sent from my iPhone using Tapatalk

cart around · 08-02-2018, 09:13 PM

I see this problem was before the new pump. I'll have to think about it. No telling what his rebuild skills were.

Jeff_Walter · 08-02-2018, 09:17 PM

Thanks it’s like it’s starving it’s self from not getting enough fuel back it off a little and it runs better. This is not a screaming machine by any way shape or form. I thought it would be faster. Maybe I’ll put the governor back in place and see what happens. Thanks for all your help you have a tremendous amount of knowledge that I’m lacking and I appreciate all your help !!!!!

Sent from my iPhone using Tapatalk

cart around · 08-02-2018, 10:35 PM

The governor is not worth the trouble.
Removing it should take the cart from 12 mph to around 18 mph.
Show us some pictures of your carburetor area. I would like to see how the throttle cable is hooked up.

Jeff_Walter · 08-02-2018, 10:36 PM

Ok I will take some tomorrow morning.

Sent from my iPhone using Tapatalk

Jeff_Walter · 08-03-2018, 10:20 AM

Carb photos

Sent from my iPhone using Tapatalk

cart around · 08-03-2018, 01:35 PM

I keep forgetting that this is a 3-pg. I am not familiar with exactly how the throttle linkages are supposed to connect. You will need somebody with 3-pg experience to help you with that.

Now, having said that, I'm thinking that your throttle cable should be hooked to the end of the carburetor lever.

Your governor linkage is missing, so it will be different from this video. Take a look at his throttle. Ignore the part about replacing reed valves. https://www.youtube.com/watch?v=mJ5ZjCTVQKU

Jeff_Walter · 08-03-2018, 01:39 PM

Thanks I’ll look into this as well.

Sent from my iPhone using Tapatalk

jc.howell08 · 08-06-2018, 09:23 AM

The mixture screw doesn't look right.
I cant post a picture pointing int out to you I'm still to new here but hopefully somebody else can help with that.

May need to set it

08-02-2018, 09:08 PM	#11
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18	Re: Leaking gas I want to say no the guy fixed the motor portion said he bypassed it to get more speed out of it. Didn’t seem to give me much more anyways. Sent from my iPhone using Tapatalk
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18

08-02-2018, 09:13 PM	#12
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: Leaking gas I see this problem was before the new pump. I'll have to think about it. No telling what his rebuild skills were.

08-02-2018, 09:17 PM	#13
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18	Re: Leaking gas Thanks it’s like it’s starving it’s self from not getting enough fuel back it off a little and it runs better. This is not a screaming machine by any way shape or form. I thought it would be faster. Maybe I’ll put the governor back in place and see what happens. Thanks for all your help you have a tremendous amount of knowledge that I’m lacking and I appreciate all your help !!!!! Sent from my iPhone using Tapatalk
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18

08-02-2018, 10:35 PM	#14
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: Leaking gas The governor is not worth the trouble. Removing it should take the cart from 12 mph to around 18 mph. Show us some pictures of your carburetor area. I would like to see how the throttle cable is hooked up.

08-02-2018, 10:36 PM	#15
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18	Re: Leaking gas Ok I will take some tomorrow morning. Sent from my iPhone using Tapatalk
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-03-2018, 10:20 AM	#16
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18	Re: Leaking gas Carb photos Sent from my iPhone using Tapatalk
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18

08-03-2018, 01:35 PM	#17
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,495	Re: Leaking gas I keep forgetting that this is a 3-pg. I am not familiar with exactly how the throttle linkages are supposed to connect. You will need somebody with 3-pg experience to help you with that. Now, having said that, I'm thinking that your throttle cable should be hooked to the end of the carburetor lever. Your governor linkage is missing, so it will be different from this video. Take a look at his throttle. Ignore the part about replacing reed valves. https://www.youtube.com/watch?v=mJ5ZjCTVQKU

08-03-2018, 01:39 PM	#18
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18	Re: Leaking gas Thanks I’ll look into this as well. Sent from my iPhone using Tapatalk
Jeff_Walter Not Yet Wild Join Date: Feb 2018 Posts: 18

08-06-2018, 09:23 AM	#19
jc.howell08 Not Yet Wild Join Date: Aug 2018 Location: Mississippi Posts: 19	Re: Leaking gas The mixture screw doesn't look right. I cant post a picture pointing int out to you I'm still to new here but hopefully somebody else can help with that. May need to set it

Similar Threads
Thread	Forum
PDS Leaking Oil	Electric EZGO
G9 leaking oil	Gas Yamaha
Oil Leaking	Gas EZGO
G14 leaking gas	Gas Yamaha
G1 leaking gas	Gas Yamaha