|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-29-2018, 08:06 AM | #1 |
Not Yet Wild
Join Date: Aug 2018
Posts: 4
|
EZGO Robin 290 Carburetor Motor Mounts
Are the threaded carburetor motor studs easy to change out?
Are these threaded studs ordered in a kit or sepertate? I over torqued one of them during reassembly of the carb. THANKS!! New gas engine owner.... |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-29-2018, 08:07 PM | #2 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,217
|
Re: EZGO Robin 290 Carburetor Motor Mounts
Metric all thread ? should work.
M6 X 1 X 105MM LG I am assuming you stripped the threaded stud ? and not the cylinder head ? |
09-05-2018, 04:28 PM | #3 |
Not Yet Wild
Join Date: Aug 2018
Posts: 4
|
Re: EZGO Robin 290 Carburetor Motor Mounts
Its two long all thread that you slip the carburetor onto then seal against the motor. However i got lucky and was able to remove the one I broke and replaced it with a piece of 1/4" all-thread from fastenal. i have it running again, THANKS FOR THE REPLY!!!!
Give em hell! |
09-05-2018, 09:28 PM | #4 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,217
|
Re: EZGO Robin 290 Carburetor Motor Mounts
You did get lucky using 1/4 uss threads because those are metric threaded studs, at least on the ones I have worked on. Oh well.
|
Tags |
carb, carburetor, mounts |
|
|
Similar Threads | ||||
Thread | Forum | |||
carburetor for 295cc robin | Gas EZGO | |||
r1000 ezgo motor mounts | Big Block Talk! | |||
Need 1997 EZGO 9 hp motor carburetor | Gas EZGO | |||
WTB Robin 350 carburetor non-MCI | Golf Carts and Parts |