|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-28-2020, 09:42 AM | #1 |
Not Yet Wild
Join Date: May 2020
Posts: 2
|
Yamaha G1 solenoid square to round conversion
I am converting a 1980 Yamaha G1 golf cart square solenoid 6 studs to a new round solenoid with 4 studs on front and 2 on back. When ordered it says that this solenoid replaces the old one but needs modifications and does not tell you how to do it. Can you help with wiring explanation and maybe pictures?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-28-2020, 10:50 AM | #2 |
Gone Wild
Join Date: Jan 2017
Location: venice
Posts: 1,807
|
Re: Yamaha G1 solenoid square to round conversion
|
05-28-2020, 11:24 AM | #3 |
Not Yet Wild
Join Date: May 2020
Posts: 2
|
Re: Yamaha G1 solenoid square to round conversion
Is it possible to only replace one solenoid. My reverse works fine but do not know wiring set up if I leave that one.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G29 , rear axle not square after lift | Electric Yamaha | |||
2 solenoid conversion | Gas Columbia ParCar | |||
48v conversion - no solenoid click | Electric EZGO | |||
G-1 solenoid square to round conversion | Gas Yamaha | |||
Problems with solenoid on 36v to 48v conversion? | Electric Club Car |