Stability bar install issue with Rhox 6” spindle lift kit

Jlong579 · 12-13-2020, 11:33 AM

Hello, I just installed a Rhox 6” drop spindle lift kit on my 2012 Yamaha G29. I almost finished with no issues. The problem I have is with the stabilizer bar reinstall. There is too much space between the kit provided drop bracket and the stabilizer bar.
I’ve tried raising and lowering the axle with no luck. I can’t figure it out. And advice or tips would be appreciated.

Ryokuro · 12-28-2020, 09:20 AM

Have you watched this?

https://www.youtube.com/watch?v=9LgA...nel=RHOXGarage

12-13-2020, 11:33 AM	#1
Jlong579 Not Yet Wild Join Date: Dec 2020 Posts: 1	Stability bar install issue with Rhox 6” spindle lift kit Hello, I just installed a Rhox 6” drop spindle lift kit on my 2012 Yamaha G29. I almost finished with no issues. The problem I have is with the stabilizer bar reinstall. There is too much space between the kit provided drop bracket and the stabilizer bar. I’ve tried raising and lowering the axle with no luck. I can’t figure it out. And advice or tips would be appreciated.
Jlong579 Not Yet Wild Join Date: Dec 2020 Posts: 1

12-28-2020, 09:20 AM	#2
Ryokuro Getting Wild Join Date: Nov 2020 Location: Baltimore Posts: 110	Re: Stability bar install issue with Rhox 6” spindle lift kit Have you watched this? https://www.youtube.com/watch?v=9LgA...nel=RHOXGarage

Similar Threads
Thread	Forum
RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer?	Lifted Golf Carts
Gas RXV Rhox Spindle lift kit install	Gas EZGO
Rhox Spindle Lift???	Lifted Golf Carts
Rhox Spindle Lift ?	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum