Disable Backup Signal

[Quetal]

I figured it out... remove ignition panel and tape over the device, muted it nicelyI would like to disable or mute the backup signal of our Tomberlin E500. I can't find it on the unit, anyone know where it might be. I found the horn etc..., figuring the signal may be in the vicinity, but it isn't.

Thanks

Henry

[OLD MEC]

I dont know if you are aware of possible law suits because of backup alarms being disabled? Many states have laws against muteing or disconnecting alarms of any type, California being one of the worst?

[Timdelta]

Originally Posted by Quetal

I figured it out... remove ignition panel and tape over the device, muted it nicelyI would like to disable or mute the backup signal of our Tomberlin E500. I can't find it on the unit, anyone know where it might be. I found the horn etc..., figuring the signal may be in the vicinity, but it isn't.

Thanks

Henry

Go to the Tomberlin pages and look there. It is on drivers side up high on one of the supports. Stick head in front of passenger front wheel looking up towards driver---hard to see. Stick ear plugs in ear and look for it moving hand around---you'll find it.