09-06-2015, 08:31 PM | #1 |
Not Yet Wild
Join Date: Jul 2015
Posts: 30
|
led
Have a 6 led 1350 lumens bar light I would like to hook it up to bottom front of golf cart, Just got a led wiring harness kit, I have a 2011 txt/pds cart I need to put this on, Anybody if they can in a nutshell where does what go to what? The kit has a toggle switch, and my cart is 12 volt system with tow run switch, Question : does this model have a voltage reducer already on it? TIA
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-06-2015, 11:54 PM | #2 |
Not Yet Wild
Join Date: Jul 2015
Posts: 30
|
Re: led
Probably won't use toggle switch! Rather wire it directly to headlights so the light bar will come on when the headlights do.
|
09-07-2015, 12:00 AM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: led
Just follow the wires from the factory headlights back to the point where one wire splits into the two for the individual headlight bulbs. Splice your light wires there.
|
09-07-2015, 08:09 AM | #4 |
Guest
Posts: n/a
|
Re: led
|
09-07-2015, 01:00 PM | #5 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: led
|
09-07-2015, 01:34 PM | #6 |
Not Yet Wild
Join Date: Jul 2015
Posts: 30
|
Re: led
I have a phoenix body with headlights instead of light bar
|
09-07-2015, 03:10 PM | #7 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: led
Ok, if your light wires are 14ga or better, you should have no problem tapping into them, or better yet, hooking the leds up to the main light switch. Hook to the side that goes to the lights (switched side).
|