|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-06-2020, 04:56 PM | #1 |
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 466
|
how do I make my current settings the defualt on my alltrax
controller while I send my FN2 switch in for repair?
it would be cool if we had a gage that works with the controller that showed rpm, temp, etc. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-06-2020, 05:03 PM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: how do I make my current settings the defualt on my alltrax
Connect to laptop, adjust settings to desired values and hit set button.
It exists. https://alltraxinc.com/bluetooth/ |
06-07-2020, 10:00 AM | #3 |
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 466
|
Re: how do I make my current settings the defualt on my alltrax
thank you that worked perfectly even the auto firmware update went without a hitch
|
06-07-2020, 01:06 PM | #4 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: how do I make my current settings the defualt on my alltrax
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax xct settings | Electric EZGO | |||
Alltrax settings | Electric EZGO | |||
Protecting high current connections on alltrax | Electric EZGO | |||
Alltrax DCX 400 Settings | Electric EZGO | |||
Alltrax settings | Electric EZGO |