2006 club car precedent

dracor · 09-25-2011, 02:58 PM

up graded the solenoid and motor controller...48volt and 500 amp.....I can identify where the resistor is placed on the solenoid (from big nut to big nut), but where does the diode go?

shadowman · 09-25-2011, 03:03 PM

small post to small post with the silver band towards positive..........................

dracor · 09-25-2011, 03:32 PM

thanks Tom!

Colbyntx · 09-25-2011, 04:33 PM

Got it running yet? Results? You did get 4 or 2 ga wires also, right?

dracor · 09-25-2011, 06:26 PM

yes...I got 4g wire but made the mistake of listening to someone that said it was a precident model, when in fact it is a ds....now I have to find out if the solenoid and motor controller along with the diode and resistor need to be exchanged....what is your impression

Colbyntx · 09-25-2011, 08:04 PM

If the controler and you got was for a shunt CC (F/R rocker switch), then it should be fine. The solenoid won't know the difference. They should both have the 5k-0 MCOR. How can yo get a DS and Precedent confused?

They look night and day different.

dracor · 09-25-2011, 08:41 PM

Got them confused cause it was a used cart and I listened to my golfing brotherinlaw.....it wasn't until I got the controller ordered when I looked at the website and saw the president had the bumper guard all the way around the body....my cart does have a f/r toggle switch. The hd solenoid and diode/resistor doesn't need to switch out too does it?

Colbyntx · 09-25-2011, 08:56 PM

It should all be the same as far as controller, solenoid, resistor & diod. Post your carts full serial # and we can tell you exactally what you have. Should be in the passanger side glove box area. What controller did you order?

dracor · 09-26-2011, 01:42 AM

AQ0651-711115 it was the alltrax 500 amp programmmable controller....thanks

Colbyntx · 09-26-2011, 07:52 AM

Quote:

Originally Posted by dracor

AQ0651-711115 it was the alltrax 500 amp programmmable controller....thanks

Your cart is a 48V IQ system. The parts your ordered for a Precedent will all be the same in this case. You got lucky! You should also be able to get the battery cables to work. Remember, anytime you remove a cable from the motor, use 2 wrenches! You dont want to spin that stud! My craftsman 9/16's wouldn't fit under the lug so I bought a cheap 9/16 from northern tools and put it on a grinder until it fit.

09-25-2011, 02:58 PM	#1
dracor Getting Wild Join Date: Sep 2010 Posts: 77	2006 club car precedent up graded the solenoid and motor controller...48volt and 500 amp.....I can identify where the resistor is placed on the solenoid (from big nut to big nut), but where does the diode go?
dracor Getting Wild Join Date: Sep 2010 Posts: 77

09-25-2011, 03:03 PM	#2
shadowman The Last Moja Morani Join Date: Jan 2007 Location: jumping from cart to cart Posts: 8,975	Re: 2006 club car precedent small post to small post with the silver band towards positive..........................

09-25-2011, 03:32 PM	#3
dracor Getting Wild Join Date: Sep 2010 Posts: 77	Re: 2006 club car precedent thanks Tom!
dracor Getting Wild Join Date: Sep 2010 Posts: 77

09-25-2011, 04:33 PM	#4
Colbyntx Gone Wild Join Date: Jun 2010 Location: East Texas Posts: 602	Re: 2006 club car precedent Got it running yet? Results? You did get 4 or 2 ga wires also, right?

09-25-2011, 06:26 PM	#5
dracor Getting Wild Join Date: Sep 2010 Posts: 77	Re: 2006 club car precedent yes...I got 4g wire but made the mistake of listening to someone that said it was a precident model, when in fact it is a ds....now I have to find out if the solenoid and motor controller along with the diode and resistor need to be exchanged....what is your impression
dracor Getting Wild Join Date: Sep 2010 Posts: 77

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

09-25-2011, 08:04 PM	#6
Colbyntx Gone Wild Join Date: Jun 2010 Location: East Texas Posts: 602	Re: 2006 club car precedent If the controler and you got was for a shunt CC (F/R rocker switch), then it should be fine. The solenoid won't know the difference. They should both have the 5k-0 MCOR. How can yo get a DS and Precedent confused? They look night and day different.

09-25-2011, 08:41 PM	#7
dracor Getting Wild Join Date: Sep 2010 Posts: 77	Re: 2006 club car precedent Got them confused cause it was a used cart and I listened to my golfing brotherinlaw.....it wasn't until I got the controller ordered when I looked at the website and saw the president had the bumper guard all the way around the body....my cart does have a f/r toggle switch. The hd solenoid and diode/resistor doesn't need to switch out too does it?
dracor Getting Wild Join Date: Sep 2010 Posts: 77

09-25-2011, 08:56 PM	#8
Colbyntx Gone Wild Join Date: Jun 2010 Location: East Texas Posts: 602	Re: 2006 club car precedent It should all be the same as far as controller, solenoid, resistor & diod. Post your carts full serial # and we can tell you exactally what you have. Should be in the passanger side glove box area. What controller did you order?

09-26-2011, 01:42 AM	#9
dracor Getting Wild Join Date: Sep 2010 Posts: 77	Re: 2006 club car precedent AQ0651-711115 it was the alltrax 500 amp programmmable controller....thanks
dracor Getting Wild Join Date: Sep 2010 Posts: 77

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
2006 club car precedent	Golf Carts and Parts
Club Car Precedent 2006- Speed	Electric Club Car
2006 Club Car Precedent	Electric EZGO
2004 / 2006 precedent club car	Electric Club Car
2006 Club Car Precedent speed	Gas Club Car