EZGO Series

[Helirich]

Originally Posted by paintdude96

tell me how the solenoid is going to weld its self and if it does then u can turn it off with the key . I can hold the button down with my foot and act like it got welded and turn the key off and what do u know the cart turns off wow its crazy how the key will it that cart off that's crazy right

It doesn't mater how many switches you put in line on the actuation side of a solenoid, once it welds, it's not going to open.

In the link you posted, I believe there are two different "go fast" systems. The diagram that 89roady posted is very clear and the power still has to go through the F/R switch. In the other diagram, it's not very clear or complete. Do you have a better one?

[paintdude96]

here it is. you have your cart hooked up already running stock , well get an extra solenoid and a button and 2x2ga cables and 2x16ga cables and hook them up like this. your just adding this not replacing anything just add this to your already running system .

[Helirich]

I see, pretty simple. I guess you could use any 12 volt solenoid also.

[paintdude96]

yeah my other buddy has his on a 12v one and another buddy has a 48v one . just make sure that u get one that has like 400 amp or more

[scottyb]

Originally Posted by paintdude96

yeah my other buddy has his on a 12v one and another buddy has a 48v one . just make sure that u get one that has like 400 amp or more

Why 400 amps for field wires ?

[paintdude96]

that's just what a golf cart guy once told me

[scottyb]

Originally Posted by paintdude96

that's just what a golf cart guy once told me

I wondered why because field wires never carry that kind of amperage.

[kgsc]

series cart so full current through S and A terminals correct ?