lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 10-29-2016, 01:26 PM   #1
Jwbass
Not Yet Wild
 
Join Date: Sep 2016
Posts: 26
Default axe 4844 controller

I am about to program my axe 4844 controller on a 92 marathon but I have not had any luck finding which parameters to set everything at. if anyone could point me in the right direction about where I should have my settings for this 36 volt marathon it would be much appreciated
Jwbass is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 10-29-2016, 01:56 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: axe 4844 controller

Ezgo Marathon + 400a control = Max amp settings.
Throttle rate default was 12-15 I believe.
Plug brake was 60%
It's been awhile since I programmed an AXE. Alltrax is 2 generations past that model now.

Anything in particular you need info on?
scottyb is offline   Reply With Quote
Old 10-29-2016, 02:39 PM   #3
Jwbass
Not Yet Wild
 
Join Date: Sep 2016
Posts: 26
Default Re: axe 4844 controller

Is the high pedal disabled need to be marked and where should over under voltage be. THanks
Jwbass is offline   Reply With Quote
Old 10-29-2016, 02:45 PM   #4
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: axe 4844 controller

HPD is a good safety feature. It will prevent the cart from LAUNCHING like a rocket if somebody turns the key on with the pedal down.

I set 36v system low voltage cut off at 27-28 volts.... I don't wan't my pack being drawn down lower than that.
scottyb is offline   Reply With Quote
Old 10-29-2016, 02:49 PM   #5
Jwbass
Not Yet Wild
 
Join Date: Sep 2016
Posts: 26
Default Re: axe 4844 controller

Thanks buddy
Jwbass is offline   Reply With Quote
Old 10-29-2016, 04:25 PM   #6
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: axe 4844 controller

no problem,
scottyb is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
4844 controller ? Electric EZGO
will a 200/800peak solenoid make a differance on a Alltrax 4844 controller Electric EZGO
Alltrax 4844 Question Electric EZGO
alltrax npx 4844 Electric Club Car
Question about the Alltrax npx 4844??? Electric EZGO


All times are GMT -5. The time now is 08:52 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.