36v TXT key switch wiring help.

[Rwalsh77]

Originally Posted by scottyb

The micro switches fry very easily when shorted. The drivers side is the key power switch in both directions and the passenger side is the reverse activation for buzzer or reduced speed if controller is capable of this function. Originally the red power(+) and blue keyswitch feed wires were on the driver side switch......hope this helps

I just found your conversion kit to make it a toggle style. Do you recommend this for me at this time? I would love the style for sure




Sent from my iPhone using Tapatalk

[scottyb]

I recommend it for anybody wanting a better way to shift the series drive cart.
The simple toggle switch shift was the best everyday upgrade to my old 1999. It gives a very positive contact latching in both directions compared to the old rotary style switch. And it's easier to use. What's not to like?

[Rwalsh77]

Originally Posted by scottyb

I recommend it for anybody wanting a better way to shift the series drive cart.

The simple toggle switch shift was the best everyday upgrade to my old 1999. It gives a very positive contact latching in both directions compared to the old rotary style switch. And it's easier to use. What's not to like?

Sweet. Thanks for the help! I will order now. What shipping times like normally?


Sent from my iPhone using Tapatalk

[scottyb]

Usually 3 days anywhere in the USA - weather conditions have adversely effected some deliveries last week

[Rwalsh77]

Originally Posted by scottyb

Usually 3 days anywhere in the USA - weather conditions have adversely effected some deliveries last week

You rock man. Just emailed you as well!!


Sent from my iPhone using Tapatalk

[Rwalsh77]

Originally Posted by agpfl

I fried my stock controller when I did the same thing. Replaced with Alltrax and now very happy.

Sent from my SM-G950U using Tapatalk

Thank you for the insight. Looks like it is the main micro switch on the F/R switch. Upgrade time!


Sent from my iPhone using Tapatalk

[Rwalsh77]

Originally Posted by kgsc

3 microswitches. 2 on the fnr and another in the floor box. You can test the last one through the wiring.

Thanks for all the insight!! ScottyB is hooking me up with a replacement upgrade!


Sent from my iPhone using Tapatalk