Where should I mount my battery meter?

[drballard33]

New cart owner, has enjoyed reading as much as possible here and upgrading my 2016 TXT. I want to order a battery meter but I am struggling on where exactly to mount it and would like your advice. The picture shows my current setup, you can see I added the dash with locked storage so I have a little flexibility...any thoughts?

[scottyb]

Right under the key is about the only place.

[PingEye3]

Originally Posted by drballard33

New cart owner, has enjoyed reading as much as possible here and upgrading my 2016 TXT. I want to order a battery meter but I am struggling on where exactly to mount it and would like your advice. The picture shows my current setup, you can see I added the dash with locked storage so I have a little flexibility...any thoughts?

I would change out the key switch to what is in the link. It is a standard TXT KS when the cart has lights. Move the wires on the current light sw to the light switch terminals on the switch. The first position of the switch is KS on, the second is KS on & lights. Then, go to second link and get this digital voltmeter. I will 3D print you a rectangular adapter for the meter that uses two screws to mount. You can cut a slightly larger hole than needed for meter as meter snaps into my meter plate. This will also cover up the hole where your existing light switch is. No charge for the adapter plate, just postage. You will need to PM me your shipping address.

The picture shows an adapter for a different meter than the one in the link, but it is very similar. This one is actually an adapter to put the RoyPow SOC meter in place of the factory RXV meter on the dash.

https://www.amazon.com/10L0L-Ignitio...xpY2s9dHJ1ZQ==

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1