![]() |
|
Big Block Talk! Everything about swapping a big block engine into your cart! |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() Join Date: Mar 2010
Location: San Diego, CA
Posts: 69
|
![]() Ok, so I had a electric fuel pump on my vanny. I want to change to a vacuum fuel pump. I bought the pump but now I'm stumped....where does the hose go to connect to the vacuum supply? I have searched the forums and the web and can't find anything. My motor didn't come with a fuel pump when I bought it new from CPP so I did the electric pump. I don't see any fittings on the motor to connect it to. Any and all help is appreciated....pics would be ideal, but I can read if need be.
thanks everyone. |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Not your usual outlaw
![]() ![]() Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,031
|
![]() Look at you intake, air filter housing, etc. Mine is on the air filter housing just before the carb.
|
![]() |
![]() |
![]() |
#3 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 17,444
|
![]() |
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() ![]() Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
![]() follow the arrows on the pump the middle fitting should be for vaccume supply and
![]() |
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
![]() Join Date: Mar 2010
Location: San Diego, CA
Posts: 69
|
![]() Can I tap the valve cover and put my own fitting on there? When I get home I'll look at the air filter housing to see if one is there. I see the oil breather that vents ino the air filter assembly but that's all I remember seeing
You guys saved me a ton of time. I spent hours on the web just looking at big block pics to see if I an see the fuel pump connection. Would a 16hp valve cover fit in the 18? There is one on eBay that has the fitting on it. Thx |
![]() |
![]() |
![]() |
#6 |
Not Yet Wild
![]() Join Date: Mar 2010
Location: San Diego, CA
Posts: 69
|
![]() Sorry cartzilla. I meant where does the hose from the fuel pump (vacuum side) connect to the engine. Thx
|
![]() |
![]() |
![]() |
#7 | ||
Gone Wild
![]() ![]() Join Date: May 2011
Location: Pickens/Dacusville s.c.
Posts: 1,386
|
![]() Quote:
Quote:
|
||
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Duromax 16hp valve cover drill for fuel pump hose? Metal shavi | Clone Engine Swaps | |||
vanny 18hp oil temp | Big Block Talk! | |||
18 HP Vanny - Which fuel pump, electric or vacuum? | Big Block Talk! | |||
Mod your 14-18hp vanny cheap.... | Big Block Talk! | |||
How much vacuum to fuel pump? | Gas Columbia ParCar |