lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-10-2016, 05:27 PM   #1
felber61
Not Yet Wild
 
felber61's Avatar
E-Z-GO
 
Join Date: Sep 2009
Location: McCook, NE
Posts: 47
Default adjustment screw for 87

Okay so I'm on my 3rd Carb now and everyone has worked fine but the mixture screws keep falling out of the darn things. I have set the nut so tight that I think I'm going to break the castings and even used red Loctite the last time. Any ideas on where to just get the mixture screw? Or at least how to get the darn things to stay in?? The cart continues to run without it but obviously this is bad for it since I'm on my second top end in less than 18 months. Thanks in advance.
felber61 is offline   Reply With Quote
 
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
Carb adjustment screw fell out Gas Yamaha
Missing a adjustment screw on Carb Gas EZGO
HELP - need idle adjustment screw for 2PG !!!! Golf Carts and Parts
Idle Adjustment Screw Gas Club Car
fuel air adjustment screw on carbuerator Gas Club Car


All times are GMT -5. The time now is 11:46 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.