|
07-02-2016, 03:09 PM
|
#1 |
|
Gone Wild
Join Date: Feb 2009
Location: Wisconsin
Posts: 168
|
Fly wheel
Hi all I have a 2pg that I am trying to replace crank seals in clutch is off flywheel is fighting me . I have bent 4 6mm bolts, broken one puller, soaked it in wd , heated it and beat it. It has not moved . What next ? why didn't they just make this so you could use jack screws to remove it? Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-02-2016, 03:44 PM
|
#2 |
|
Getting Wild
Join Date: Jun 2016
Posts: 81
|
Re: Fly wheel
PB blaster and let it soak for a day then spray it again . Will be doing this again myself this week
|
|
|
|
|
07-02-2016, 04:18 PM
|
#3 |
|
Gone Wild
Join Date: Feb 2009
Location: Wisconsin
Posts: 168
|
Re: Fly wheel
Have been hitting it with WD twice a day for a week.
|
|
|
|
|
07-02-2016, 04:29 PM
|
#4 |
|
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,495
|
Re: Fly wheel
WD-40 advertises as a penetrant, but there are much better ones on the market.
PB Blaster, Knocker Loose, and CRC to name a few. I used a steering wheel puller, and an impact to remove mine. No soaking was necessary. http://shop.advanceautoparts.com/p/s...FQctaQodG1AGxw |
|
|
|
|
07-02-2016, 04:47 PM
|
#5 |
|
Getting Wild
Join Date: Jun 2016
Posts: 81
|
Re: Fly wheel
Yeah wd just doesn't cut it , it works better as a lube or a paper weight. Get PB blaster or Royal Purple deep kreep
|
|
|
|
|
07-02-2016, 05:07 PM
|
#6 |
|
Getting Wild
Join Date: Jul 2010
Location: Ohio
Posts: 93
|
Re: Fly wheel
Zepreserve is the only way to roll for penetrating spray. I've probably tried most all of them over the last 30 years.
|
|
|
|
|
07-02-2016, 06:32 PM
|
#7 |
|
Getting Wild
Join Date: Jun 2016
Posts: 81
|
Re: Fly wheel
Never heard of that one , where do you find it ?
|
|
|
|
|
07-02-2016, 09:41 PM
|
#8 |
|
Getting Wild
Join Date: Jul 2010
Location: Ohio
Posts: 93
|
Re: Fly wheel
Anywhere Zep products are sold, Home Depot for one.
I get it from the salesman at work. Best way to get that flywheel off is to put the puller on it, run it down ape sh!t tight, warm up the flywheel around the shaft, remove the socket from the puller and smack the end of the puller with a hammer. (NOT with the other end of the crank against anything either) |
|
|
|
|
07-03-2016, 11:03 AM
|
#9 |
|
Gone Wild
Join Date: Feb 2009
Location: Wisconsin
Posts: 168
|
Re: Fly wheel
Got it off . Thanks all. Besides the seals anything else I should do while it is apart?
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wanted - Steering Wheel - Adaptor + Wheel | Golf Carts and Parts | |||
| Lugnut, stud, rear wheel problem (wheel came off) | Lifted Golf Carts | |||
| Rear Wheel Studs too Short for 3 inch wheel Spacer | Electric EZGO | |||
| Harley 3 wheel front wheel seals | Gas Harley Davidson | |||
| Alignment of Steering Wheel Only - Wheel Base Straight | Gas Yamaha | |||
Linear Mode
