02 help. NO go

[4vertical]

So, after a long time my neighbor finally asks me to look at her electric ezgo. Pretty sure I don't know anything about controller carts.

I checked pack voltage. 36 volt cart. It's ok. No power to ignition switch. Reverse beeper does not beep when shifting to reverse. Both of the micro switches on the fnr assembly seem to be working when checked with voltmeter.

So basically I came to a halt of things to look at.
Controller is a curtis with 3 big lugs and a 6 pin plug using only 4 wires.

Any help, or a thread to point me to, would be very much appreciated!

[yurtle]

First, look up the year and type of control system. Both links can be found in the stickies.

I'd guess it's the reed switch, which can easily be bypassed, given the limited info provided.