|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-09-2018, 12:16 PM
|
#1 |
|
Not Yet Wild
 Join Date: Feb 2018
Location: Senoia, GA
Posts: 14
|
Need help installing rebuilt Robins EH29C
I’ve pulled the engine successfully. As I’m moving pieces over there is a plug on the bottom left of the new engine where the pump hose would be fastened. I assume I should remove it but it’s pretty hard to turn and I don’t want to damage the new engine. Is it possible not to need this hose in the new engine?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-11-2018, 07:05 PM
|
#2 |
|
Not Yet Wild
Join Date: Feb 2018
Location: Senoia, GA
Posts: 14
|
Re: Need help installing rebuilt Robins EH29C
Turns out this was a breather hose they choose not to use or install after the rebuild. Overall great experience with Cindy and Motors & More.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| ezgo gas robins eh29c no power on hills | Gas EZGO | |||
| Compression for EH29C Robins engine | Gas EZGO | |||
| Break in procedure rebuilt 295cc robins ezgo engine | Gas EZGO | |||
| Newly installed rebuilt eh 292 robins eng. w/ no pressure to the fuel pump? | Gas EZGO | |||
| Installing rebuilt alternator | Gas Yamaha | |||
Linear Mode
