|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
10-31-2011, 06:41 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Darwin, Australia
Posts: 68
|
96 ezgo not going
Hi All
I have a 96 Ezgo that firstly had a stuffed reed switch which i bypassed. There had been some arcing at the 9pin plug going into the control box, so I replaced the plug. Now the buggie only goes for a few yards and then nothing? Any suggestions would be greatly appreciated. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-31-2011, 07:35 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,401
|
Re: 96 ezgo not going
A 9 pin makes it a DCS cart.....Your controller is stuffed also.
|
|
|
|
|
10-31-2011, 07:55 PM
|
#3 |
|
Just one day at a time
Join Date: Sep 2009
Location: South TX
Posts: 8,650
|
Re: 96 ezgo not going
Yeppers, normal fate for most DCS carts
 |
|
|
|
|
10-31-2011, 08:28 PM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Darwin, Australia
Posts: 68
|
Re: 96 ezgo not going
Thanks all
|
|
|
|
|
10-31-2011, 08:35 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,401
|
Re: 96 ezgo not going
Sorry we haven't better news, this fella is in the same boat...... little more info here.
http://www.buggiesgonewild.com/elect...tml#post642264 |
|
|
|
|
11-01-2011, 02:39 AM
|
#6 |
|
Not Yet Wild
Join Date: Sep 2011
Location: Darwin, Australia
Posts: 68
|
Re: 96 ezgo not going
Thanks again,
I have pulled the controller apart and there are no real bad burn outs, only 1 resistor open circuit. The resistor is R30 but I cannot see the value of it. Would anyone have any idea? The controller is a Curtis 73144G06 which I believe is a 1206sx-005 Thanks |
|
|
|
Linear Mode
