Voltage reducer placement

[1fastbuggy]

A buddy of mine is getting a 2009 precedent delivered Saturday. We are installing a few accessories and have an idea of where to place the voltage reducer, relays, and fuse block but are wanting to see where others are mounting them. Anyone have any pictures or tips learned while installing? Thanks

[shadowman]

i don,t have any pics but the few i have seen from C.C. if the cart has 4 12 volt batts it was mounted in the middle of the battery compartment........if it has 8 volt batts it seems the #1 spot is framerail on drivers side behind batteries .............if you look there are a few holes already there you can use.....the ground block same side but in front of the batteries on the lower part of the seat brace...........................

[oconnorb]

I ended up installing an additional 12V deep cycle marine battery to run my accessories, the voltage reducer I had previously installed was not providing a ‘steady” current flow to support all requirements. I have six 8V batteries; a 12V will fit nicely behind the 8V batteries with the installation of a upper cross brace (with padding).