|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
04-03-2013, 08:16 AM
|
#1 |
|
Gone Wild
Join Date: Dec 2010
Location: Orlando
Posts: 382
|
Charger won't charge even with obc bypassed
I am working on a 48v DS 1999 and the charger when Plugged in comes on but sits at 0A. I figured obc was bad and bypassed it by running a wire from fuse on receptacle to main negative and it still reads 0A. Cart has 48.6V across pack and I have tried several chargers and they all do the same thing. Any ideas?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-03-2013, 04:53 PM
|
#2 | |
|
Gone Wild
 Join Date: Aug 2009
Posts: 14,245
|
Re: Charger won't charge even with obc bypassed
Quote:
Only look at the cart. Is the charging wire hooked up on the main positive lead? It seems like the OBC is good, since it still didn't work when you bypassed it. Maybe try an OBC reset (sticky) if you haven't already. Also check your wiring. You could have a wire wrong somewhere... |
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| G1 , switched to pre-mix and bypassed gov. now no start | Gas Yamaha | |||
| Who has a bypassed OBC? | Electric Club Car | |||
| new batts and charger wont charge, charger works on other carts | Electric Club Car | |||
| G1 Governor bypassed now what..... | Gas Yamaha | |||
| How to hook up 12volt charger with 36 volt charger to charge 48 volts | Electric EZGO | |||
Linear Mode
