|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-14-2013, 05:27 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Posts: 17
|
Ezgo dcs slows and stops motor build? help!!
Have a ezgo dcs runs perfect just put a lift on 6" with 22" tires but it would do this before I replaced controller with used one new solenoid and 4 gauge wires its VERY slow goin up hill and don't have a lot of torque is this the motor? I'm very good with tools does someone make a build kit also this cart set for 2 years with bad batteries ( before it was mine) could I take the motor apart and clean it? Blast it or? I guess it could be rusted? Any help would be great
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-15-2013, 02:04 PM | #2 |
Not Yet Wild
Join Date: Aug 2013
Posts: 17
|
Re: Ezgo dcs slows and stops motor build? help!!
Anybody?
|
09-15-2013, 02:32 PM | #3 |
Master of All Things
Join Date: May 2013
Location: West Columbia, Texas
Posts: 18,001
|
You mentioned that it was a bit slow going up hills, but putting the bigger tires hurt you more as it took some of your torque away. If it were me, I would go with a 500 amp controller and a SD Solenoid .... and it wouldn't hurt to have a complete set of 2 ga. Cables. And send your motor off to plum quik.
The Master of All Things has Spoken |
|
|
Similar Threads | ||||
Thread | Forum | |||
motor slows down at full pedal | Electric Club Car | |||
2005 Precendent slows and intermittently stops | Electric Club Car | |||
Motor Stops | Gas Club Car | |||
cart slows then stops | Electric EZGO | |||
EZ Go Electric "hops" and slows down and stops running | Electric EZGO |